MOOG DS2000XP控制器驱动程序
PQM脉冲输入（单位）：此参数是PQM脉冲输出将计数的基本单位的名称。它仅用作标签，与脉冲输入的操作无关。5.PQM脉冲输入1/2/3/4值：这是由开关输入确定的分配给每个计数操作的值。6.PQM总计脉冲输入：此参数创建配置的各种脉冲输入的求和寄存器。可将其配置为用作脉冲输入的PQM开关输入的任何组合。使用KYZ端子的脉冲启动器应用PQM脉冲输入：根据接收器类型，典型的终端接收器需要KY或KZ之间的触点闭合。由于PQM开关输入的多功能参数，PQM开关输出未作为专用脉冲输入设备标记KYZ标记。然而，PQM仍然可以用作脉冲计数器。
PQM Pulse Input (Units): This parameter is the name given to the base units that the PQM Pulse Input(s) will be counting. It is used as a label only and has no bearing on the operation of the Pulse Input. 5. PQM Pulse Input 1/2/3/4 Value: This is the value assigned to each counting operation as determined by the Switch Input. 6. PQM Totalized Pulse Input: This parameter creates a summing register of the various Pulse Inputs configured. It can be configured for any combination of the PQM Switch Inputs used as Pulse Inputs. Application of the PQM Pulse Input(s) With a Pulse Initiator Using KYZ Terminals: Typical end receivers require a contact closure between KY or KZ based upon the type of receiver. Because of the multi-functional parameters of the PQM Switch Inputs, the PQM Switch Inputs are not labeled with KYZ markings as a dedicated pulse input device. However, the PQM can still be used as a pulse counter.
