ICS TRIPLEX T3150A工控模块备件
t功能菜单。3.469PC显示以下对话框，显示数字计数器设置点信息。图3-5：数字输入1–数字计数器设定值4。对于需要数值的设定点（例如，报警级别），点击设定点值框内的任何位置都会启动一个数字键盘，显示设定点值的旧值、范围和增量。5.数值设定点值也可以通过在设定点值框末尾滚动向上/向下箭头来选择。值相应地递增和递减。6.对于需要非数字预设值（例如数字计数器类型）的设定点，点击设定点值框内的任何位置都会显示一个下拉选择菜单。7.对于需要字母数字文本字符串（例如数字计数器名称）的设定点，将值直接输入设定点值框。GE Multilin 469电机管理继电器3-11 3用户界面3.2 469PC软件界面3 e）将设定点文件升级为新版本469固件升级后，可能需要升级先前保存的设定点文件的修订代码。1.与继电器建立通信。2.选择“实际”>“产品信息”菜单项，并记录继电器固件的主版本标识符；例如，30D270A8.000，其中270是主版本标识符，指固件版本2.70。3.选择File（文件）>Open（打开）菜单项，并输入要下载到所连接继电器的已保存设定点文件的位置和文件名。当文件打开时，469PC软件将处于“文件编辑”模式和“不通信”。4.选择文件>属性菜单项，并记录设定点文件的版本代码。如果设定点文件的版本代码（例如2.6X）与固件的主版本代码不同（如步骤1中所示，为270），则使用下拉选项卡显示可用的版本代码，并选择与固件匹配的版本代码。例如：固件版本：30D270A8.000当前设定点文件版本：2.6X将设定点文件的版本更改为：2.7X图3–6：设定点文件第5版。选择文件>保存菜单项以新格式保存设定点文件。6.有关将此设定点文件下载到469的说明，请参阅第c）节：从文件加载设定点。f） 打印设定值和实际值使用以下程序打印设定值列表：1。选择文件>打开菜单项并打开先前保存的设定点文件，或与469建立通信。2.选择文件>打印设置菜单项，选择设置点（全部）或设置点（启用功能），然后单击确定。选择文件>打印菜单项将设定点文件发送到打印机。使用以下步骤打印实际值列表：1。与469建立沟通。2.选择“文件”>“打印设置”菜单项，选择“实际值”，然后单击“确定”。选择“文件”>“打印”菜单项，将实际值文件发送到打印机。3-12 469电机管理继电器GE Multilin 3.2 469PC软件
he Function menu. 3. 469PC displays the following dialog box showing the Digital Counter setpoint information. Figure 3–5: DIGITAL INPUT 1 – DIGITAL COUNTER SETPOINTS 4. For setpoints requiring numerical values (e.g. ALARM LEVEL), clicking anywhere within the setpoint value box launches a numerical keypad showing the old value, range, and increment of the setpoint value. 5. Numerical setpoint values may also be chosen by scrolling with the up/down arrows at the end of the setpoint value box. The values increment and decrement accordingly. 6. For setpoints requiring non-numerical pre-set values (e.g. DIGITAL COUNTER TYPE), clicking anywhere within the setpoint value box displays a drop-down selection menu. 7. For setpoints requiring an alphanumeric text string (e.g. DIGITAL COUNTER NAME), enter the value directly into the setpoint value box. GE Multilin 469 Motor Management Relay 3-11 3 USER INTERFACES 3.2 469PC SOFTWARE INTERFACE 3 e) UPGRADING SETPOINT FILES TO A NEW REVISION It may be necessary to upgrade the revision code for a previously saved setpoint file after the 469 firmware has been upgraded. 1. Establish communications with the relay. 2. Select the Actual > Product Information menu item and record the Main Revision identifier of the relay firmware; for example, 30D270A8.000, where 270 is the Main Revision identifier and refers to firmware version 2.70. 3. Select the File > Open menu item and enter the location and file name of the saved setpoint file to be downloaded to the connected relay. When the file is open, the 469PC software will be in “File Editing” mode and “Not Communicating”. 4. Select the File > Properties menu item and note the version code of the setpoint file. If the version code of the setpoint file (e.g. 2.6X) is different than the Main Revision code of the firmware (as noted in Step 1, as 270), use the pulldown tab to expose the available revision codes and select the one which matches the firmware. For example: Firmware revision: 30D270A8.000 current setpoint file version: 2.6X change setpoint file version to: 2.7X Figure 3–6: SETPOINT FILE VERSION 5. Select the File > Save menu item to save the setpoint file in the new format. 6. See Section c): Loading Setpoints from a File for instructions on downloading this setpoint file to the 469. f) PRINTING SETPOINTS AND ACTUAL VALUES Use the following procedure to print a list of setpoints: 1. Select the File > Open menu item and open a previously saved setpoint file, OR establish communications with the 469. 2. Select the File > Print Setup menu item, select either Setpoints (All) or Setpoints (Enabled Features) and click OK. 3. Select the File > Print menu item to send the setpoint file to a printer. Use the following procedure to print a list of actual values: 1. Establish communications with the 469. 2. Select the File > Print Setup menu item, select Actual Values and click OK. 3. Select the File > Print menu item to send the actual values file to a printer. 3-12 469 Motor Management Relay GE Multilin 3.2 469PC SOFTWARE
