KOLLMORGEN AKM42E-EKGNR-01驱动器电机,AKM42E-EKGNR-01使用区域
FBM201/b/c/d模块的主要功能包括：
八个通道用于输入模拟传感器信号：
0至20 mA dc–FBM201
0至100 mV dc–FBM201b
0至5 V dc–FBM201c
0至10 V dc–FBM201d
每个模拟输入通道都是电隔离的来自其他通道和地面
紧凑、坚固的设计，适用于G3级（恶劣）环境
KOLLMORGEN AKM42E-EKGNR-01电机模拟输入应用程序的执行提供转换时间和可配置集成时间和变化率选项限制
通过sigma-delta数据实现高精度每个通道的转换
本地或将现场接线远程连接到FBM201/b/c/d模块
每个通道内部的终端组件和/或外部回路供电变送器。概述每个FBM201/b/c/d模拟输入接口模块
包含八个模拟输入通道，每个通道接受模拟传感器的2线直流输入
例如4至20 mA或0至5V变送器，或自供电20 mA电源。
模块执行所需的信号转换连接来自现场的电气输入信号传感器至可选冗余现场总线。
FEATURES
Key features of the FBM201/b/c/d modules are:
Eight channels for input of analog sensor signals:
0 to 20 mA dc – FBM201
0 to 100 mV dc – FBM201b
0 to 5 V dc – FBM201c
0 to 10 V dc – FBM201d
Each analog input channel is galvanically isolated
from other channels and ground
Compact, rugged design suitable for enclosure in
Class G3 (harsh) environments
Execution of an analog input application program
that provides conversion time and configurable
options for integration time and Rate of Change
Limits
High accuracy achieved by sigma-delta data
conversions for each channel
Termination Assemblies (TAs) for locally or
remotely connecting field wiring to the
FBM201/b/c/d modules
Termination Assemblies for per channel internally
and/or externally loop powered transmitters.OVERVIEW
Each FBM201/b/c/d Analog Input Interface Module
contains eight analog input channels, each channel
accepting a 2-wire, dc input from an analog sensor
such as a 4 to 20 mA or 0 to 5V transmitter, or a selfpowered 20 mA source.
The modules perform the signal conversion required
to interface the electrical input signals from the field
sensors to the optionally redundant fieldbus.
