DEIF PCD1.M120液压计模块,PCD1.M120使用书
Phoenix扫描仪为多个高级参数提供跳闸诊断，包括：功率规格、trum密度、平均振幅、最佳拟合、单一震源、内部故障或这些参数的组合。
当扫描仪响应熄火状态而跳闸时，跳闸原因存储在跳闸中登记跳闸寄存器中总共存储了八（8）个跳闸事件，最旧的存储在机器人位置LE（1）中，最新的存储在顶部位置LED（8）中。
DEIF PCD1.M120液压计模块注：一旦填充，必须重置跳闸寄存器，以存储后续跳闸。会的不会自动重置或翻滚。
步骤1-输入密码同时按下目标火焰选择和背景火焰选择按钮。
使用向上或向下按钮选择LED编号[2]（密码）。
同时按下目标火焰选择和背景火焰选择按钮。
步骤2-在跳闸寄存器中选择跳闸事件
跳闸寄存器的内容显示扫描仪跳闸的原因，并将使用LED。要在跳闸寄存器中选择特定跳闸事件，请使用向上按钮滚动至
DEIF PCD1.M120跳闸寄存器和向下按钮滚动至跳闸寄存器底部。两个按钮都不会滚动结束
最早的跳闸事件存储在底部LED位置（LED=1），最新的跳闸事件存储在最顶部的LED位置（2到8，取决于记录的事件数量）。只有八（8）
可以存储跳闸事件。它们不会自动重置或翻滚。
Advanced Trip Diagnosis
The Phoenix scanner provides trip diagnosis for several advanced parameters including: Power Spec
trum Density, Average Amplitude, Best Fit, Single Source, Internal Fault, or a combination of these.
Whenever the scanner trips in response to a flame out condition, the reason for the trip is stored in a Trip
Register. A total of eight (8) trip events are stored in the Trip Register with the oldest stored in the bot
tom position LED (1) and the newest in the top position LED (8).
NOTE: Once filled, the Trip Register MUST be reset in order to store subsequent trips. It will
NOT automatically reset or roll-over.
Step 1 - Enter the pass code
Press both the Target Flame Select and Background Flame Select buttons simultaneously.
Use the UP or DOWN buttons to select LED number [2] (passcode).
Press both the Target Flame Select and Background Flame Select buttons simultaneously.
Step 2 - Selecting the Trip Event in the Trip Register
The contents of the Trip Register show the reason for a scanner trip and will be displayed using the
LEDs. To select a specific trip event in the Trip Register, use the UP button to scroll to the top of the
Trip Register and the DOWN button to scroll to the bottom of the Trip Register. Neither button will roll
over.
The oldest trip event is stored in the bottom LED position (LED = 1) and the newest trip event is stored
in the topmost LED position (2 through 8 depending on how many events are logged). Only eight (8)
trip events can be stored. They will not automatically reset or roll-over.
